Injini ye-NEMA11 hybrid stepper engu-28mm enobukhulu obungu-1.8 degree step angle D shaft ukuphakama okuhlukahlukene Isithombe Esifakiwe

Injini ye-NEMA11 hybrid stepper engu-28mm enobubanzi obungu-1.8 degree step angle D shaft ukuphakama okuhlukahlukene

Incazelo emfushane:

Inombolo Yemodeli:	28HS32
Uhlobo lwenjini:	imoto ye-hybrid stepper
I-engeli yesinyathelo:	1.8°/isinyathelo
Usayizi wemoto:	28mm(NEMA 11)
Inani lezigaba:	Izigaba ezimbili (i-bipolar)
Ubude benjini:	32~51mm
Inani elincane le-oda:	Iyunithi e-1

Sithumelele i-imeyili

Imininingwane Yomkhiqizo

Amathegi Omkhiqizo

Incazelo

Lena yimoto ye-Hybrid stepper engu-28mm (NEMA 11) enomshini wokukhipha i-D.
I-engeli yesinyathelo ijwayelekile ngo-1.8°/isinyathelo.
Sinokuphakama okuhlukile ongakhetha kukho, kusukela ku-32mm kuya ku-51mm.
Njengoba ukuphakama kukhulu, injini ine-torque ephezulu, futhi intengo nayo iphakeme.
Kuncike ku-torque edingekayo yekhasimende kanye nesikhala, ukuze kunqunywe ukuthi yikuphi ukuphakama okufaneleka kakhulu.

Ngokuvamile, ama-motor esiwakhiqiza kakhulu ama-bipolar motors (izintambo ezi-4), futhi sine-unipolar motors etholakalayo, uma amakhasimende efuna ukushayela le moto enezintambo ezi-6 (izigaba ezi-4).

Amapharamitha

I-Angle Yesinyathelo (°)	Ubude benjini (mm)	Ukubamba i-torque *(gcm)**	Okwamanje /isigaba (Isigaba/isigaba)	Ukumelana (Ω/isigaba)	Ukunyakaza (mH/isigaba)	Inani le ama-lead	I-inertia yokujikeleza *(gcm**²)	Isisindo (KG)
1.8	32	430	0.95	2.8	0.8	6	9	0.11
1.8	32	600	0.67	5.6	3.4	4	9	0.11
1.8	45	750	0.95	3.4	1.2	6	12	0.14
1.8	45	950	0.67	6.8	4.9	4	12	0.14
1.8	51	900	0.95	4.6	1.8	6	18	0.2
1.8	51	1200	0.67	9.2	7.2	4	18	0.2

Umdwebo Wokuklama

Mayelana ne-hybrid stepper motor

Ama-motor e-hybrid stepper asesimweni sesikwele esijwayelekile, futhi i-stepper motor ingabonakala ngesimo sayo sangaphandle esiyingqayizivele.
Injini ye-hybrid stepper ine-engeli yesinyathelo esingu-1.8°(isinyathelo/ukuguquka okungu-200) noma i-engeli yesinyathelo esingu-0.9° (izinyathelo ezingu-400/ukuguquka). I-engeli yesinyathelo inqunywa yinombolo yezinyo kuma-lamination e-rotor.

Kunezindlela eziningi zokuqamba injini ye-hybrid stepper:
Ngeyunithi ye-Metric (iyunithi: mm) noma ngeyunithi ye-Imperial (iyunithi: intshi)
Isibonelo, injini engu-42mm = injini ye-stepper engu-1.7 intshi.
Ngakho-ke injini engu-42mm ingabizwa nangokuthi injini ye-NEMA 17.

Incazelo yegama lenjini ye-hybrid stepper:
Isibonelo, injini ye-stepper engu-42HS40:
I-42 isho ukuthi usayizi ungama-42mm, ngakho-ke iyinjini ye-NEMA17.
I-HS isho injini ye-Hybrid Stepper.
40 kusho ukuthi ukuphakama kuyinjini engu-40mm.
Sinokuphakama okuhlukile okufanele amakhasimende akhethe kukho, uma ukuphakama kukhulu, injini izoba ne-torque ephezulu, isisindo esikhulu, kanye nentengo ephezulu.
Nasi isakhiwo sangaphakathi senjini ejwayelekile ye-hybrid stepper.

Isakhiwo esiyisisekelo sama-motor e-NEMA stepper

Ukusetshenziswa kwe-Hybrid stepper motor

Ngenxa yokulungiswa okuphezulu kwezimoto ze-hybrid stepper (izinyathelo ezingu-200 noma ezingu-400 ngokujikeleza ngakunye), zisetshenziswa kabanzi ezinhlelweni ezidinga ukunemba okuphezulu, njenge:
Ukuphrinta kwe-3D
Ukulawulwa kwezimboni (i-CNC, umshini wokugaya ozenzakalelayo, imishini yendwangu)
Izinto ezisetshenziswa yikhompyutha
Umshini wokupakisha
Nezinye izinhlelo ezizenzakalelayo ezidinga ukulawulwa okunembile okuphezulu.

Amanothi mayelana nama-motor e-hybrid stepper

Amakhasimende kufanele alandele isimiso "sokukhetha ama-stepper motor kuqala, bese ukhetha umshayeli ngokusekelwe ku-stepper motor ekhona"
Kungcono ukungasebenzisi imodi yokushayela enezinyathelo eziphelele ukushayela imoto ye-hybrid stepping, futhi ukudlidliza kukhulu ngaphansi kokushayela enezinyathelo eziphelele.
Injini ye-Hybrid stepper ifaneleka kakhulu ngezikhathi zesivinini esiphansi. Siphakamisa ukuthi isivinini singadluli ku-1000 rpm (6666PPS kuma-degree angu-0.9), okungcono phakathi kuka-1000-3000PPS (0.9 degrees), futhi ingaxhunywa ngebhokisi legiya ukuze yehlise isivinini sayo. Injini isebenza kahle kakhulu futhi inomsindo ophansi ngesivinini esifanele.
Ngenxa yezizathu zomlando, yimoto ene-voltage engu-12V kuphela esebenzisa i-12V. Amanye ama-voltage alinganisiwe ekudwebeni komklamo akuwona ama-voltage okushayela afanele kakhulu emoto. Amakhasimende kufanele akhethe i-voltage yokushayela efanele kanye nomshayeli ofanele ngokusekelwe ezidingweni zawo.
Uma injini isetshenziswa ngesivinini esikhulu noma umthwalo omkhulu, ngokuvamile ayiqali ngesivinini sokusebenza ngqo. Siphakamisa ukuthi kwandiswe kancane kancane imvamisa kanye nesivinini. Ngezizathu ezimbili: Okokuqala, injini ayilahlekelwa yizinyathelo, kanti okwesibili, inganciphisa umsindo futhi ithuthukise ukunemba kokuma.
Injini akufanele isebenze endaweni yokudlidliza (ngaphansi kwama-PPS angu-600). Uma kufanele isetshenziswe ngesivinini esiphansi, inkinga yokudlidliza ingancishiswa ngokushintsha i-voltage, i-current noma ukufaka i-damping.
Uma injini isebenza ngaphansi kwama-PPS angu-600 (ama-degree angu-0.9), kufanele iqhutshwe ugesi omncane, i-inductance enkulu kanye ne-voltage ephansi.
Uma imithwalo inesikhathi esikhulu sokungakhathali, kufanele kukhethwe injini enkulu.
Uma kudingeka ukunemba okuphezulu, kungaxazululwa ngokungeza i-gearbox, ukwandisa isivinini senjini, noma ukusebenzisa ukushayela okuhlukaniswe ngezigaba. Futhi kungasetshenziswa injini enezigaba ezi-5 (injini eyodwa) kodwa intengo yesistimu yonke ibiza kakhulu, ngakho ayivamile ukusetshenziswa.

Usayizi wenjini ye-Stepper:
Njengamanje sinezinjini ze-hybrid stepper ezingama-20mm(NEMA8), 28mm(NEMA11), 35mm(NEMA14), 42mm(NEMA17), 57mm(NEMA23), 86mm(NEMA34). Siphakamisa ukuthi kutholakale usayizi wenjini kuqala, bese kuqinisekiswa enye ipharamitha, uma ukhetha injini ye-hybrid stepper.

Isevisi Yokwenza Ngokwezifiso

Sinikeza isevisi yokwenza ngokwezifiso ku-motor kufaka phakathi inombolo yentambo yocingo (4wires/6wires/8wires), ukumelana nekhoyili, ubude bekhebula nombala, futhi sinokuphakama okuhlukahlukene amakhasimende angakhetha kukho.
Umgodi ojwayelekile wokukhipha ungumgodi we-D, uma amakhasimende edinga umgodi wesikulufu sama-lead, sinikeza isevisi yokwenza ngokwezifiso kuma-screws ama-lead, futhi ungalungisa uhlobo lwesikulufu sama-lead kanye nobude bomgodi.
Isithombe esingezansi yimoto ejwayelekile ye-hybrid stepper ene-screw ye-trapezoidal lead.

Uhlobo lwenjini ye-NEMA stepper

Isikhathi Sokuhola kanye Nolwazi Lokupakisha

Uma sinezibonelo esitokweni, singathumela amasampula ezinsukwini ezi-3.
Uma singenawo amasampula esitokweni, sidinga ukuwakhiqiza, isikhathi sokukhiqiza singaba yizinsuku ezingama-20 zekhalenda.
Ekukhiqizweni okukhulu, isikhathi sokuhola sincike enanini le-oda.

Indlela yokukhokha kanye nemigomo yokukhokha

Ngokujwayelekile samukela i-Paypal noma i-alibaba kumasampula.
Ukuze kukhiqizwe ngobuningi, samukela inkokhelo ye-T/T.

Uma sibheka amasampula, siqoqa inkokhelo ephelele ngaphambi kokukhiqiza.
Ekukhiqizweni okukhulu, singamukela inkokhelo yangaphambi kwesikhathi engu-50% ngaphambi kokukhiqiza, bese siqoqa inkokhelo esele engu-50% ngaphambi kokuthunyelwa.
Ngemva kokubambisana nge-oda izikhathi ezingaphezu kweziyisithupha, singaxoxisana ngeminye imigomo yokukhokha njenge-A/S (ngemuva kokubona)

Okwedlule: Injini ye-M3 screw shaft 2 isigaba 10mm mini gear type stepper motor

Olandelayo: Imoto ye-High Torque Micro 35mm stepper yephrinta